SOVEREL MARINE, INC.
2225 IdlewiIde Road, North PaIm Beach, FIorida   33410
(305) 622-9191

SOVEREL 33 RACER
STANDARD EQUIPMENT AND SPECIFICATIONS

HULL
Bamboo Beige gelcoat, 3/4 oz. mat, COFAB A 1118 B (18 oz. biaxial product), 1/2" Klegecell PVC closed cell foam, COFAB A 1118 B, stringer reinforcement, floor timbers to support keel and mast. Interior molding with bulkheads fiberglassed to hull, and sole to hull, for further stiffening. Fore & aft and athwartship ribs in bow.

DECK
Bamboo Beige gelcoat, 3/4 oz. mat, COFAB A 1118 B, 5/8" Klegecell foam, COFAB A 1118 B, liner (consisting of 1 1/2 oz. mat) vacuum bagged to deck for complete bond. Deck reinforced with wood inserts for high stress hardware.

INTERIOR
The interior is molded fiberglass sandwich core construction, fiberglassed to hull, per plans in brochure. It has a two tone gelcoat finish with teak trim. Main cabin sides are trimmed with teak as is hull deck joint. Companionway grab handles. Three (3) inch high density foam cushions - Red, Blue, Green, or Tan mattress covers, owners choice.

SPARS/RIGGING
Polyurethane finished aluminum mast with double spreaders, boom with 4 to 1 internal outhaul, stainless steel Navtec rod rigging, stainless steel turnbuckles, three wire/rope halyards, # 8 Stearns twinstay headstay, solid boom vang which eliminates topping lift, Harken 32 - 1 backstay tensioner, 1 X 19 running backstays with Harken blocks, Navtec U bolt chainplate system, spinnaker track, car, 14' pole with deck chocks, topping lift, foreguy, genoa and spinnaker sheets, mainsheet, reefing lines, vang sheet, main cunningham.

RUDDER
Fiberglass rudder with 2 1/2" stainless steel shaft, top and bottom Harken roller bearings, custom anodized aluminum tiller cap and straps, with laminated teak and holly tiller, tiller extension.

BALLAST
2,600 pound lead keel, through bolted to hull with eight 5/8" stainless steel bolts, 1/2" thick aluminum backing plate (custom fit), stainless steel nuts.

DECK HARDWARE
Stainless steel custom stemplate with tack horns, single rail stainless steel bow pulpit and stern rail, single-lifelines, inboard, outboard genoa track for #1, 2, 3 genoas, two Lewmar 43A primary winches with cleats, two Lewmar 40 AST halyard and spinnaker winches. Four quick release halyard stoppers, seven Harken Cam Matics (stoppers), Harken ball bearing traveller system complete with 6 - 1 Harken main sheet blocks, 1" Merriman "T" toe rail track, 3" Harken turning blocks, two spinnaker sheet blocks, two genoa fairleads, two winch handles.

HATCHES
Main companionway, bow smoked. Two light foam cored composite main companionway boards.

PORTLIGHTS
Four smoked, fixed.

ELECTRIC SYSTEM
12 volt 70 amp hour battery, switch and circuit breaker panel, three cabin fixtures., running lights, stern light, electric bilge pump.

HEAD
Space for head of owners choice, to meet local requirements.

GALLEY
Stainless steel sink, counter tops, storage, space for two burner gimballed stove and for portable Igloo icebox, with retaining bracket. Lockers and shelves.

ENGINE
Molded fiberglass bracket and outboard engine. Hull and interior design permits custom diesel inboard engine installation.

PRICE
FOB Soverel Marine Boat Yard,

November 15, 1983 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE